Procurement Process Improvement: A Practical Guide

What is procurement process improvement?

Procurement process improvement means finding where your buying process loses time, money or control, fixing the cause, and checking that the fix worked. Continuous improvement means doing this again and again in small steps, rather than once in a large project.

Every procurement team has improvement projects. Few keep improving after the project ends. The difference is usually simple. Teams that keep improving measure the process every month, give each problem an owner, and fix causes rather than symptoms.

Short answer. Improve a procurement process in six steps:

  1. Pick one process and measure how it performs today
  2. Map how the process actually works, not how the policy says it works
  3. Find the waste and its root cause
  4. Test a fix on a small scale
  5. Check the result against your starting figure
  6. Make the fix the standard way of working, then move to the next problem

Key takeaways

TopicKey point
Start smallFix one process at a time, starting with the one users complain about most
Measure firstWithout a starting figure, nobody can say whether the change helped
Real processMap what people actually do, including the workarounds
Root causeFix why the problem happens, not just the case in front of you
MeasuresEvery measure can be gamed. Track measures that balance each other
SuppliersMany improvements need the supplier. Build this into the contract

Where do procurement processes usually lose time and money?

Most problems show up in the same places. Use this table to find where to start.

ProblemWhat you seeCommon cause
Slow approvalsRequests wait days or weeks for a purchase orderToo many approval levels, and approvers who are not reminded
Unclear requestsBuyers go back to users for details again and againNo standard request form, or no catalogue for common items
Specifications change after quotesSuppliers must quote again and the event restartsThe need was not agreed with the user before going to market
Buying outside contractsSame item bought at different prices from different suppliersContracts are hard to find, or the contract supplier is slow
Invoice mismatchesInvoices held because price or quantity differs from the orderWrong price on the purchase order, or goods receipt not recorded
Slow supplier onboardingA chosen supplier cannot be paid for weeksDocuments collected by email, and checks done one after another
Contracts renewing at old pricesPrices stay the same even when the market fallsNo list of contract end dates and no owner for renewals
Repeat quotes for the same itemBuyers ask for quotes for the same item every monthNo rate contract for regular items

What does waste look like in procurement?

Lean thinking groups waste into seven types, first described by Taiichi Ohno at Toyota for factories (Lean Enterprise Institute). Each type has a procurement version.

Type of wasteIn a factoryIn procurement
WaitingParts wait for the next machineRequests wait for approval, and suppliers wait for answers to their questions
Over-processingMore work than the customer needsThree quotes for a very small purchase, or a full tender for a low-risk item
DefectsFaulty parts that must be reworkedWrong prices on purchase orders, which lead to invoice disputes
TransportMoving parts around without needDocuments sent back and forth by email between people and systems
MotionWorkers searching for toolsBuyers searching for the latest contract or supplier contact
InventoryStock piling up between stepsRequests piling up in a buyer’s inbox, or excess stock from bulk buys
OverproductionMaking more than is neededReports produced every month that nobody reads

Many teams add an eighth waste: unused skills. In procurement, this is an experienced buyer spending most of the day keying in purchase orders instead of working on sourcing.

How do you improve a procurement process, step by step?

These steps follow the Plan-Do-Check-Act cycle, a standard method for continuous improvement (ASQ).

1. Pick one process and measure it

Choose one process, such as “request to purchase order for indirect items”. Pick the one that users complain about most, or the one that costs the most. Then measure how it performs today. For example: the average number of days from request to purchase order, and how many requests are sent back for more detail.

Measure from the user’s point of view. The user does not care how long the buyer took. The user cares how long it took from asking to receiving.

2. Map how the process actually works

Draw each step, who does it, and how long it waits before the next step. Talk to the people who do the work, not only the managers. You will find steps that the policy does not mention, such as “the plant head checks every request by phone before approving”. These hidden steps are often where the time goes.

3. Find the waste and its root cause

Mark each step as useful or wasteful. For each wasteful step, ask “why?” until you reach a cause you can fix. For example:

  • Invoices are held. Why? The invoice price differs from the purchase order.
  • Why? The purchase order used an old price.
  • Why? The buyer copied the last order instead of using the contract price.
  • Why? Contract prices are kept in a spreadsheet that buyers cannot easily find.

The fix is to put contract prices where buyers raise orders. Telling accounts to “check invoices more carefully” would treat the symptom, not the cause.

4. Test a fix on a small scale

Try the fix on one site, one category or one buyer team first. This shows problems early and costs little if the fix does not work. Agree in advance what result would count as success.

5. Check the result

Compare the new figures with your starting figures. Look at the measures that could get worse as well. A shorter request-to-order time is not a gain if buyers achieved it by skipping competition.

6. Make it the standard, then move on

If the fix works, write it into the process, train people, and update the system. If it does not work, find out why and try a different fix. Then pick the next problem. This is what makes the improvement continuous.

What should you measure?

Pick a few measures that balance each other. Any single measure can be improved in a way that hurts the business.

MeasureWhat it tells youWatch out for
Days from request to purchase orderHow fast users get what they needBuyers skipping competition to go faster
Share of spend under contractHow much buying happens at agreed pricesContracts with high prices still count as “under contract”
Invoices matched first timeHow accurate orders, receipts and invoices areMatching rules loosened so more invoices pass
Quotes received per sourcing eventHow much competition you are creatingInviting suppliers who cannot really supply
Savings confirmed by financeWhether lower prices reach the budgetSavings counted against an inflated first quote
Supplier on-time deliveryWhether suppliers meet their promisesDelivery dates moved after the order to look on time

Agree with finance how savings are counted before you start. A saving measured against the supplier’s first quote, rather than the last price paid, can look large and mean little. For more, see our guide to procurement analytics.

How can contracts encourage suppliers to keep improving?

Many procurement costs sit with the supplier, so many improvements need the supplier’s help. A contract that only fixes the price for three years gives the supplier no reason to improve. Build improvement into the contract instead:

  • A short list of measures. Agree four to six measures, such as on-time delivery, quality and response time. Review them with the supplier at fixed intervals. Our guide to supplier performance management covers how to set these up.
  • A yearly improvement plan. Ask the supplier to propose improvements each year, such as a cheaper material, better packing or fewer deliveries. Review progress in the same meetings.
  • Shared savings. When the supplier’s idea saves you money, share part of the saving with the supplier for an agreed period. If you take the whole saving, the ideas stop.
  • Open-book costing for services. For agency and service contracts, ask the supplier to show the main parts of its cost, such as staff, overheads and margin. This shows where savings can come from without cutting the supplier’s margin below a fair level.
  • Price reviews linked to the market. For long contracts, agree when and how the price will be reviewed, for example against a published index. This avoids paying old prices after the market has fallen.

Be careful with fixed yearly price cuts that are not linked to any real change. The supplier may meet them by cutting quality or service, and you will not see it until something goes wrong. For deeper work with key suppliers, see supplier development and supplier relationship management.

Kaizen, Lean or Six Sigma: which should you use?

MethodWhat it meansGood for in procurement
KaizenMany small improvements made by the people who do the workDaily problems, such as a confusing request form
LeanRemove steps that add no valueSlow processes, such as approvals and supplier onboarding
Six SigmaUse data to reduce errors and variationRepeated errors, such as invoice mismatches
Plan-Do-Check-ActPlan a change, test it, check the result, then adopt or adjustAny improvement, as the basic cycle

You do not need to choose one. Most procurement teams use the Plan-Do-Check-Act cycle as the base, Lean to remove waiting and extra steps, and Six Sigma tools only for repeated errors with good data behind them.

What are the common mistakes?

  • Starting without a starting figure. Nobody can show the change, and support fades.
  • Mapping the process from the policy. The real process, with its workarounds, is where the problems are.
  • Fixing symptoms. Checking invoices harder does not fix wrong prices on purchase orders.
  • Buying software first. A slow process put into new software is still slow. Fix the process, then automate it.
  • Chasing one measure. Faster ordering at the cost of competition is not an improvement.
  • Leaving suppliers out. Many of the largest gains need the supplier to change something.
  • No owner after the project. Without someone checking the measures each month, the process slowly goes back to how it was.

How does Krinati support procurement process improvement?

Krinati’s eSourcing platform puts RFIs, RFQs, RFPs and reverse auctions in one place, in place of email. Suppliers bid online, and every invitation, bid and award decision is recorded. This removes much of the waiting and back-and-forth in sourcing, and gives you the data to measure competition and price trends. For the steps after sourcing, see our guide to eProcurement.

Frequently asked questions about procurement process improvement

What is procurement process improvement?

Procurement process improvement means finding where your buying process loses time, money or control, fixing the cause, and checking that the fix worked. Continuous improvement means doing this again and again in small steps, rather than once in a large project.

How do you improve the procurement process?

Pick one process and measure how it performs today. Map how it actually works. Find the waste and its root cause. Test a fix on a small scale. Check the result against your starting figure. If it worked, make it the standard way of working, then move to the next problem.

What are the most common problems in procurement processes?

Slow approvals, unclear purchase requests, specifications that change after suppliers have quoted, buying outside contracts, invoices that do not match the purchase order, slow supplier onboarding and contracts that renew automatically at old prices.

What measures should you track for procurement process improvement?

Track time from request to purchase order, the share of spend under contract, invoices that match the order first time, the number of quotes received per sourcing event, savings confirmed by finance and supplier on-time delivery. Track each measure from the start, so you can show the change.

How can contracts encourage suppliers to keep improving?

Agree a small set of performance measures and review them with the supplier at fixed intervals. Ask for a yearly improvement plan. Share the savings from ideas the supplier brings, so the supplier gains too. For service contracts, an open-book cost model makes it easier to see where savings can come from.

What is the difference between Kaizen, Lean and Six Sigma in procurement?

Kaizen means many small improvements made by the people who do the work. Lean focuses on removing steps that add no value, such as waiting for approvals. Six Sigma uses data to reduce errors and variation, such as invoice mismatches. Most procurement teams use ideas from all three.