Procurement Market Research: A Step-by-Step Guide

What is market research in procurement?

Market research in procurement means studying the supplier market for a category before you ask for prices. You find out who can supply, how the price is made up, how prices are moving and what could go wrong. You use the results to decide which suppliers to invite, what price to expect and how to run the sourcing event.

Market research comes before the RFQ or RFP, not after. If you skip it, you invite the same suppliers as last time, accept the first price as normal, and write a specification that only one supplier can meet.

Short answer. Do procurement market research in six steps:

  1. Describe the need by what it must do, not by brand
  2. Do desk research on past prices, price indices and suppliers
  3. Talk to suppliers, often through an RFI
  4. Build a simple cost breakdown of the price
  5. Check the health of the likely suppliers
  6. Write the findings into your sourcing plan

Key takeaways

TopicKey point
TimingDo the research before you write the RFQ or RFP
NeedDescribe what the item must do. A brand name in the specification removes competition
PriceKnow a fair price range before you see the first quote
CostBreak the price into materials, labour, energy, freight and margin
SuppliersCheck supplier health and registrations before you invite them
OutputThe research should decide who to invite, which event to run and what price to target

Why do market research before you source?

Mistakes made before the sourcing event are hard to fix later. Most of them come from not knowing the market:

  • The specification fits one supplier. If the user’s request names a brand or copies one supplier’s data sheet, other suppliers cannot bid. Competition is gone before the event starts.
  • The budget is wrong. If raw material prices have risen 20% since the last purchase, last year’s price is not a fair target. Suppliers will not bid, or the event will fail.
  • Only the usual suppliers are invited. New suppliers with better prices or better technology are never asked.
  • The first price looks normal. Without a reference price, you cannot tell whether a quote is fair.
  • The wrong contract is used. A fixed price in a market where prices move every month makes suppliers add a risk margin to every quote.

Market research is also required in some public procurement rules. In the United States, Part 10 of the Federal Acquisition Regulation requires agencies to do market research before most purchases and to record the results (FAR Part 10).

What should you find out about the market?

QuestionWhy it mattersWhere to look
Who can supply this?Shows how much competition you can createSupplier lists, trade associations, trade fairs, public tender results, RFI responses
Is the market made up of many small suppliers or a few large ones?Shows who has more power in the negotiationIndustry reports, supplier annual reports
What makes up the price?Shows which costs drive the price, and which you can challengeCost breakdown, supplier discussions
Which way are prices moving?Shows whether last year’s price is still fairPrice indices, commodity exchange prices
What could disrupt supply?Shows the risks to plan forLead times, capacity, import duties, how many supplier locations exist
Are the suppliers financially sound and properly registered?Avoids awarding to a supplier that cannot deliverCompany filings, tax registration checks, credit reports
Are there new products or methods?You may be able to buy something better, not just cheaperSupplier meetings, product demonstrations

How do you do procurement market research, step by step?

1. Describe the need by what it must do

Write down what the item or service must do, the volume, the delivery location and the timeline. Avoid brand names and one supplier’s part numbers. For example, write “pump able to move 50 cubic metres an hour at 30 metres head” instead of naming one maker’s model. This lets more suppliers offer a solution.

Agree the description with the user department before you go to the market. If the need changes after suppliers have quoted, you will have to start again.

2. Do desk research

Start with what you already have:

  • Your own data. Past purchase orders, past bids, and who won and why. A spend analysis shows what you buy today and from whom.
  • Price indices. In India, the Office of the Economic Adviser publishes the Wholesale Price Index (WPI) each month for hundreds of items (eaindustry.nic.in). In the US, the Bureau of Labor Statistics publishes the Producer Price Index (BLS PPI). For metals, use exchange prices such as the London Metal Exchange.
  • Industry bodies. Some trade associations publish price data for their sector. In India, IEEMA publishes price variation formulas and raw material prices for electrical equipment such as transformers and cables (IEEMA).
  • Public tender results. Government buyers in India publish tenders and awards on the Central Public Procurement Portal (CPPP) and the Government e-Marketplace (GeM). These show who bids for similar work.
  • Supplier annual reports. Listed suppliers report their margins, capacity and plans.

3. Talk to suppliers

Desk research tells you what has happened. Suppliers can tell you what is about to happen, such as new capacity, longer lead times or a raw material shortage.

A request for information (RFI) is a structured way to do this. Ask about capability, capacity, certifications, lead times and typical price drivers. State clearly that the RFI is for information only and will not lead directly to an order. Suppliers then answer honestly instead of quoting a sales price.

Talk to suppliers you do not use today, not only current ones. Current suppliers have a reason to tell you the market is tight.

4. Build a simple cost breakdown

Split the price into its main parts: raw materials, labour, energy, freight, overheads and margin. You do not need exact numbers. A rough split is enough to tell you which index to watch and which costs to question.

For example, if copper makes up most of the cost of a cable, the cable price should move broadly with the copper price. If copper falls and the supplier’s price does not, you have a clear reason to ask why.

5. Check the health of likely suppliers

Before you invite a supplier, check that it is real, registered and able to deliver. In India:

  • Check company details and filings on the Ministry of Corporate Affairs portal.
  • Check that the GSTIN is active using the GST portal’s taxpayer search. A supplier with a cancelled GSTIN cannot issue an invoice on which you can claim input tax credit.
  • Check whether the supplier is a micro, small or medium enterprise through its Udyam registration. This affects your payment terms (see below).

For larger contracts, also look at credit reports and the supplier’s dependence on your business. A supplier for whom you are more than a quarter of its sales may struggle if your volumes drop. For a fuller method, see our guide to supplier qualification and selection.

6. Write the findings into your sourcing plan

The research is only useful if it changes what you do next. Use it to decide:

  • Which suppliers to invite, including new ones
  • Which event to run: an RFQ for clear specifications, an RFP for complex needs where suppliers propose a solution
  • Your target price range, before you see any quotes
  • The contract type: a fixed price, or a price linked to an index
  • The risks to cover, such as a second supplier for a part with only one source

Your strategic sourcing process then takes the category from this plan to a signed contract.

How do you research the market price before a negotiation?

Work out a fair price range before you see the supplier’s number. Use four checks together:

  1. Adjust the last price for the market. Take the last price you paid and move it up or down by the change in a relevant price index since then.
  2. Build a cost breakdown. Estimate what the main cost parts should add up to, plus a reasonable margin.
  3. Compare current quotes on the same terms. Make sure GST, freight, packing, payment terms and delivery terms are the same in each quote. A quote that looks cheaper may simply leave out freight.
  4. Know what you will do if the deal fails. A second qualified supplier, or the option to delay the purchase, is what gives you room to negotiate.

If the prices you receive are far above your range, ask the supplier which cost has gone up. If they cannot explain it, the price is not based on cost. For more, see our guide to contract negotiation strategies.

When should a price be linked to an index?

When a large part of the cost is a raw material or energy whose price moves often, a fixed price is risky for both sides. The supplier adds a margin to protect itself. If prices then rise sharply, the supplier may ask to reopen the contract, or stop supplying.

A price variation clause solves this. The price moves up or down with a named index, using a formula agreed in the contract. IEEMA’s clauses for electrical equipment are one example used widely in India (IEEMA). When you use one, agree the index, the base date, the share of the price that moves, and how often the price is adjusted.

How do MSME suppliers affect your research in India?

If many suppliers in the market are micro or small enterprises, your payment terms are limited by law. Under Section 15 of the MSMED Act, 2006, a buyer must pay a micro or small supplier within the agreed period, which cannot be more than 45 days. Since the Finance Act 2023, Section 43B(h) of the Income Tax Act lets a buyer deduct late payments to these suppliers as an expense only in the year they are actually paid (TaxGuru).

So find out which likely suppliers are micro or small enterprises before you set payment terms. Asking them for 90-day terms will either break the law or push them to quote higher.

RFI, RFQ and RFP: which one when?

ToolWhat you askWhen to use itLeads to an order?
RFI (request for information)What can you do, and how?During market research, when you do not yet know the market wellNo
RFQ (request for quotation)What is your price for this exact item?When the specification is clear and price is the main decisionYes
RFP (request for proposal)How would you meet this need, and at what price?For complex needs where suppliers propose their own solutionYes

The RFI belongs to market research. The RFQ and RFP are the sourcing events that follow. A reverse auction can be the final negotiation step after an RFQ, once suppliers are qualified and the specification is fixed. See also what an RFP is and why to digitalise it.

What are the common mistakes in procurement market research?

  • Doing it after the RFQ. By then the specification and supplier list are already fixed.
  • Only asking current suppliers. They have a reason to say the market is tight and prices must rise.
  • Using last year’s price as the target. Adjust it for what has happened to costs since then.
  • Letting the RFI become a price negotiation. Suppliers stop sharing useful information.
  • Not checking registrations. A supplier with a cancelled GSTIN or a weak balance sheet becomes your problem after the award.
  • Not writing anything down. The next buyer starts from zero, and auditors cannot see why suppliers were chosen.

How often should you update market research?

Update it before every major sourcing event, and at least once a year for your largest categories. For categories tied to metals, energy or other volatile inputs, check the relevant index every month. A short one-page summary per category, updated each time, is more useful than a long report written once.

How does Krinati support market research?

Krinati’s eSourcing platform lets you send RFIs to suppliers and compare their answers side by side. You can then move the same suppliers into an RFQ, an RFP or a reverse auction. Every bid and award is recorded, so the next time you source the category, your past prices and supplier responses are already in one place.

Frequently asked questions about procurement market research

What is market research in procurement?

Market research in procurement means studying the supplier market for a category before you ask for prices. You find out who can supply, how the price is made up, how prices are moving and what risks exist. You use the results to decide which suppliers to invite, what price to expect and how to run the sourcing event.

What are the steps in procurement market research?

There are six steps. Describe the need by what it must do, not by brand. Do desk research on past prices, price indices and suppliers. Talk to suppliers, often through an RFI. Build a simple cost breakdown. Check the health of likely suppliers. Then write the findings into your sourcing plan.

How do you research the market price before a negotiation?

Take the last price you paid and adjust it for changes in a relevant price index. Build a cost breakdown of materials, labour, energy, freight and margin. Compare current quotes on the same terms. Know what you will do if the deal fails. Together these give you a fair price range before you sit down with the supplier.

What is the difference between an RFI and an RFQ?

An RFI (request for information) asks suppliers what they can do. It is part of market research and does not lead directly to an order. An RFQ (request for quotation) asks for prices against a clear specification, and the buyer may place an order based on it.

Where can you find data for procurement market research?

Use your own past purchase orders and bids, published price indices such as India's Wholesale Price Index or the US Producer Price Index, commodity exchange prices, trade association data, results of public tenders, supplier annual reports and conversations with suppliers.

How often should you update market research?

Update it before each major sourcing event and at least once a year for large categories. For categories linked to volatile raw materials, such as metals or energy, check price indices every month.